How to make industrial paint

How to make industrial paint

Paint is a chemical product that prevents corrosion by protecting surfaces against oxidation. This product adheres to the surface it is applied to, it also gives an aesthetic appearance. It consists of a solvent, pigment, filled, additive and adhesive. The solvent is removed from the surface during drying. Paint is a good adhesive, colorant and low in additives. The adhesives in the paint give the paint adhesion, cracking resistance and durability. Adhesives are pungent, clear and transparent. Pigments also add shiny and covering properties to the paint. Dyeing systems are also divided into two main classes: wet and dust. Both grades of paint are used in industrial painting processes. When it is said that industrial paint is done, it can be answered that the paint connected to both groups is made in three different applications. These applications are also surface preparation, painting and drying.

industrial paint

Unwanted Wastes Are First Removed

In surface preparation processes, undesirable wastes are removed from the surface. The reason for this process is to remove the oil and moisture from the surface. These processes are done by different methods according to the material. Sandblasting for steel, brushing for aluminum and flame etching for plastic surfaces are the leading methods. These are pre-operations. When the question of how to make industrial painting is asked, it is answered as brushing, dipping, curtain flow and spray. There are also different applications such as air, airless and electrostatic method in spray painting. The pneumatic method is the most widely used method and is ideal for robotic applications. The pump is used in the application of this method. Spray is applied to the paint piece with the help of this pump. There are also manual applications and the amount of paint applied on the product is visually checked. In the application of the pump, the paint pressure, air pressure and the characteristics of the paint are also important. In-cab conditions must also be considered in the same boiler.

Thinness of Industrial Painting

Another answer to the question of how to make industrial paint is the airless method. In this method, the paint is compressed with high pressure and applied on the piece by means of small diameter nozzles. Material transfer is high and surface quality may not be very high. Therefore, a second operation may be required. It is important to note that the paint used is extremely clean. Because the nozzle diameter is small and clean paint is not used when the nipple can be clogged. In electrostatic method, paint consumption is low and yield is high. Usually used in first coat applications.